September 28

MC801A Firmwares

Firmwares  (using google translate):



PLKPLMC801AV1.0.0B03 – Polish (Play operator). Web interface password:admin. Fully compatible with 5G networks (channel n 78 ), the speed does not slow down . The firmware is not updated via the web interface; the firmware update is conditioned by the presence of an original SIM card from the operator

SASTCMC801AV1.0.0B05 – Saudi (STC operator).
Patch 1 (for upgrading B05 to B06 version via computer): DL_MC801A_STC_SAV1.00.01
Patch 2 (for upgrading B05 to B07 version via computer): DL_MC801A_STC_SAV1.00.02

NEW: Saudi firmwareB07(STC operator)ZTE_STC_BD_SASTCMC801AV1.0.0B07 (sew via QFIL, after unpacking, the archive contains folder number 3, no other folders are needed for flashing) There is a firmware update in the web interface , the N78 (5G) channel does not work.

NEW: firmware ZAMTNMC801AV1.0.0B01 (South Africa, MTN operator) Fully compatible with 5G networks (channel n 78 ) speed does not decrease. The firmware is not updated via the web interface; the firmware update is conditioned by the presence of an original SIM card from the operator


TMOPLMC801AV1.0.0B07 – Polish (T-Mobile operator). Web interface password:admin. Fully compatible with 5G networks (channel n 78) speed does not cut . The firmware is not updated via the web interface; the firmware update is conditioned by the presence of an original SIM card from the operator

ATH3GMC801AV1.0.0B08 – Austrian (operator DreiMAXX) – Three . The firmware is not updated via the web interface, the firmware update is due to the presence of an original SIM card from the operator , the N78 (5G) channel does not work.

CNHKMC801AV1.0.0B11 – Hong Kong (SmarTone operator). Fully compatible with 5G networks (channel n 79 ), the speed does not slow down . There is a firmware update in the web interface , the N78 (5G) channel does not work.

FITELIAMC801AV1.0.0B12– Scandinavia (operator Telia), Webcam address http://192.168.32.1 , There is a firmware update in the web interface , the N78 (5G) channel does not work.

MC801A_Elisa2_B13 – Finnish (Elisa operator), Webcam address http://192.168.100.1 , The firmware is not updated via the web interface, the firmware update is due to the presence of an original SIM card from the operator , the N78 (5G) channel does not work.

CNCNLMC801AV1.0.0B12 – Mainland China, blocked frequency aggregation (no LTE CA).

CNCNLMC801AV1.0.0B18 – Mainland China, blocked frequency aggregation (no LTE CA).

CNCNLMC801AV1.0.0B22– Mainland China, blocked frequency aggregation (no LTE CA). There is an update in the web interface for firmware B33. Fully compatible with 5G networks on channel n 78 , the speed does not cut down, but it is necessary to select the carrier frequency B3 (4G) in Debug Page


NEW: : CN_CMIOT_MC801AV1.0.0B02 – China, operator, the largest operator in China “China Mobile” blocked frequency aggregation (without LTE CA). Fully compatible with 5G networks on channel n 78 , the speed does not slow down, but you need to select the carrier frequency B3 (4G) in Debug Page The firmware is not updated via the web interface.



NEW: : BD_CNBGBJMC801AV1.0.0B06 – China, Beijing region, blocked frequency aggregation (without LTE CA). Fully compatible with 5G networks on channel n 78 , the speed does not slow down, but you need to select the carrier frequency B3 (4G) in Debug Page The firmware is not updated via the web interface.

Source: https://4pda.to/forum/index.php?showtopic=1011903&st=100#entry107391391

September 28

MC801/MC801a/MC888 Backup/Restore firmware

 

 

How to backup a QCN file :

(File links at the end of the post)

1. Install the drivers: 9008 Qualcomm_USB_Driver_v1.0.zip  and DRV_DC_ZTE_AS_SETUPV1.0.0B03.exe

2. Install QPST_2.7.496 (use only this version, if another is installed, remove and install this one)
2.1. In the folder with QPST you will also find two files that you also need to install (you will need to restart the computer):

I –Python 2.7.13
II –Microsoft Visual C++ (VC_redist)

3. Connect a data cable (type C) from the bottom of the router and enable the diagnostic port by running this file: Sales_DC_SwitchPortV1.00.00
Connect a data cable (type C) from the bottom of the router and turn on the diagnostic port by running this file.

4. In the device manager, you will see that two ports have appeared, as in the screenshot:

 

5. Enable the QFIL program, which was installed along with the QPST program, go to “Tools” and select the “QCN backup restore” option: Open

 

Make sure that the diagnostic port is appeared and click
the “Backup QCN” button:

 

Copy the saved file to a safe place. The backup is located at C:\Temp on your computer.

 

Source: https://4pda.to/forum/index.php?showtopic=1011903&st=940#entry112698297

 

Files

 
Sales_DC_SwitchPortV1.00.00.exe